Certificate I in Maritime Operations (Coxswain Grade 2 Near Coastal)

Course Code MAR10418
Locations Portland

Would you prefer another study location? Click here

Study Mode Full-time, On Campus, Workplace
Length Up to 12 months
Commencement Apply any time
Timetable 12, one-day workshops and two days of practical assessments, plus further self-directed study as required
Course Overview
Study from home during COVID-19 restrictions

Whilst we pride ourselves on our hands-on training, we have had to adjust most of our courses for study from home and remote learning during the COVID-19 restrictions. This means courses will be delivered using a range of methods including online learning, virtual classrooms, workbooks and direct contact with your teacher.

Given the government restrictions that are now in place to reduce the spread of coronavirus in Australia, we expect this new model of study will continue until the government makes changes to these restrictions.


This qualification applies to people working in the maritime industry seeking an Australian Maritime Safety Authority (AMSA) certificate of competency to:

Command and operate the engines of a vessel:

  • <12 m in length
  • with propulsion power that is unlimited for an outboard engine or <100 kW for an inboard engine
  • that is not carrying passengers
  • that is in sheltered waters or within 5 nautical miles (nm) from point of departure, shore base or aquaculture lease

Command and operate the engines of a vessel:

  • as a tender or auxiliary vessel within 3 nm of a parent vessel within the exclusive economic zone (EEZ)
  • with propulsion power that is unlimited for an outboard engine or <100 kW for an inboard engine
  • that is not carrying

Mode of delivery

The units of the MAR10418 Certificate I in Maritime Operations (Coxswain Grade 2 Near Coastal) are delivered over 12 months as a self-paced, self-directed distance learning program supported by a 12 day workshop (delivered in class face-to-face) for students requiring additional practical and theory support. Where students have the required minimum 60 days sea service an AMSA form 771 must be submitted. Students without the minimum 60 days sea service will need to complete the AMSA approved Coxswain Grade 2 task book with at least 7 days sea service on commercial vessels ≥5 m long. If required a Task Book will be provided upon enrolment.

Many students undertaking this course have already completed the below three units as part of another Maritime qualification or as part of the MARSS00008 Shipboard Safety Skill Set.

  • MARF027 Apply basic survival skills in the event of vessel abandonment
  • MARF028 Follow procedures to minimise and fight fires on board a vessel
  • MARF029 Meet work health and safety requirements

As these units form part of this course, students who have completed them, will be not be required to attend on the days these units are being delivered (4-day duration).

The delivery of this qualification is facilitated through a blend of different modes including:

  • Workshops (in class face-to-face)
  • Online Training material (including webinars and online training sessions to facilitate one-on-one training)
  • Self-paced and self-directed learning
  • If required, workplace learning activities (a Task Book completed in the workplace and authenticated by SWTAFE)

The flexibility of the program allows each student additional hours of supervised instruction, if required, by attending more than one workshop block.

All students have access to their own trainer available via phone (Mon to Fri 0800 – 1630) or email and text for additional support.

Please Note:

  • The AMSA practical assessment is built into the delivery/ assessment of this course.
  • Appropriate clothing and enclosed footwear must be worn at all times while on training vessels and workshop environment

Course Outcomes and Career Opportunities

MAR10418 Certificate I in Maritime Operations (Coxswain Grade 2 Near Coastal)


The maritime industry has identified vocational outcomes and/or areas of local demand in transport, construction, shipping and tourism sectors along the east coast and inland waters

Employment Pathway:

Operate a commercial vessel under 12m within 5nm of the coastline and inland waters with a propulsion power of <100kW for inboard engines and unlimited for outboard engines.

Higher qualification Pathways:

MAR20318 Certificate II in Maritime Operations (Coxswain Grade 1 Near Coastal)  

MAR20418 Certificate II in Maritime Operations (Marine Engine Driver Grade 3 Near Coastal)

MAR30818 Certificate III in Maritime Operations (Marine Engine Driver Grade 2 Near Coastal) MAR30918

MAR30918 Certificate III in Maritime Operations (Master up to 24 metres Near Coastal)

MAR31018 Certificate III in Maritime Operations (Master Inland Waters)

MAR40618 Certificate IV in Maritime Operations (Master up to 35 metres Near Coastal)

Information Session

Why don’t you come along to our next course info session to find out everything you need to start your learning journey? You can chat with our teachers, tour our facilities, learn more about the course, find out about the application process and get your questions answered by our course experts. 

Find the next info session near you

Course Requirements
Entrance requirements & pre-requisites

A general command of spoken and written English, as well as the ability to write a simple report is required.

As a safety consideration, SWTAFE recommends all students be physically fit to carry out all the roles and responsibilities of a coxswain on a commercial vessel under 12m within 5nm of the coastline with a propulsion power of <100kW for inboard engines and unlimited for outboard engines as described under the National Standards for Commercial Vessels - Part D.

Students should also be able to swim (any stroke) a minimum of 50 metres fully clothed.

Students undertaking this course will be required to complete, or show proof of, the minimum sea service requirements (refer AMSA) within 12 months of their start date to be issued with a Certificate.

Language, Literacy, and Numeracy

It is a requirement of this course that all enrolling students undertake a language, literacy and numeracy assessment.


As some of the delivery of the course is on-line and all resources are contained in a dedicated learner portal, students must have access to a computer (with Microsoft Office software) and an internet connection.

Free Wi-Fi is available during training blocks.

As students will undertake training in the use of the SWTAFE student portal they will require basic computer skills to complete the course without disadvantage.

Enrolment Documentation

When enrolling into a SWTAFE course it is a requirement that all enrolment documentation is received before enrolment confirmation can occur. The required documents and information are listed below:

  • Pre training review
  • Enrolment Form
  • Language, Literacy and Numeracy Assessment
  • Enrolment/Induction Checklist
  • Copy of Driver’s Licence (front and back) or Passport
  • Green Medicare card/ Birth certificate

Course requirements

To be eligible for this qualification you must successfully complete 8 core units.

Units offered

Core Units

Swipe for full table
Unit Code Unit Name Unit Hours Unit Consumables
MARC037 Operate inboard and outboard motors 35 $0.00
MARF027 Apply basic survival skills in the event of vessel abandonment 35 $0.00
MARF028 Follow procedures to minimise and fight fires on board a vessel 30 $200.00
MARF029 Meet work health and safety requirements 30 $0.00
MARI003 Comply with regulations to ensure safe operation of a vessel up to 12 metres 40 $0.00
MARJ006 Follow environmental work practices 35 $0.00
MARK007 Handle a vessel up to 12 metres 80 $0.00
MARN008 Apply seamanship skills aboard a vessel up to 12 metres 55 $0.00

Assessment for this qualification is as follows:

  • Online theory quiz
  • Practical Tasks (assessed throughout the program)

Practical Assessment

Prior to attending a practical assessment

  • Students must complete all the theory
  • Students must provide a completed task book and/or appropriate sea
  • Students will be allowed 2 attempts, if required, for all practical

After applying

Once you have applied for your chosen course, you will receive a thank you email from South West TAFE with a few steps to help process your enrolment.

Complete a Pre-Training Review
You will receive an email to complete a Pre-Training Review online evaluation. This evaluation helps us tailor your training to suit your needs.

Create or provide a Unique Student Identifier (USI)
A USI is a nationally recognised reference number that provides an online record of your training qualifications gained in Australia.
Create your USI
Already have a USI but can’t remember it? Find your USI

Skills recognition
If you have experience or prior qualifications, you may be eligible to apply for recognition of prior learning and gain credits. You will be asked to provide any relevant Statement of Attainment to support identified credits.

Course Fees

Here's an outline of fees and costs associated with your course.

Your fees each year can be made up of 3 different elements.  Everyone has different circumstances that can affect what you pay and how much you pay. :

  1. Tuition fees - charged as an hourly rate that varies from course to course. A large portion of the tuition is subsidised by the Victorian Government for eligible students.
  2. Resource and/or materials costs - covers the cost of materials and other incidentals. This fee will vary according to the course being undertaken.
  3. Booklist items - such as textbooks, equipment and stationery recommended for your course

Tuition fees

There are 4 different rates of tuition fees. Only one will apply to you (depending on your eligibility and circumstances). 

  1. Government Subsidised Fee - you could be eligible for a government-subsidised rate under the Skills First funding depending on your age, educational history, and citizenship or residency status. If you are eligible, the government will contribute to the cost of your training.
    Find out more about subsidised training

  2. Government Subsidised Concession Fee - If you are eligible for a Skills First government-subsidised place and hold a current healthcare or pension card, that you can provide at enrolment, you may be eligible for the concession rate. Note, the concession rate is not applicable to Diploma level courses.
    Find out more about concession rates

  3. Free TAFE - Students who are eligible for Victorian government-subsidised training will not pay course tuition fees for the duration of their enrolment in this course, however, there may be some consumable/material fees for the course (find out more below). Any resource or material costs, or booklist items for this course are listed in the table below.
    Find out more about Free TAFE

  4. Full fee - If you are not eligible for a Skills First government-subsidised place, exemption, concession or are enrolling in a course that isn't government-subsidised, you may be required to pay the full fee rate.


The fees listed below are indicative only. The student tuition fees as published are subject to change given individual circumstances at enrolment. Funding made available to eligible individuals by State and Commonwealth Governments. If funding is utilised, this may affect future opportunities to access additional funding in the future.

Swipe for full table
Course fees by student type Indicative Course Fee
Government subsidised rate (if eligible) $1,860.00
Concession rate $375.00
Full fee rate (if not eligible for govt subsidy) $4,150.00
Resource and/or materials costs

Some courses require specific resources or materials necessary for your study eg: tools of the trade, excursions, etc. Final costs will be determined upon enrolment.

Swipe for full table
Additional course fees Indicative Course Fee
Course consumable/materials (approximate) $200.00
How do I pay my fees?

Once we have processed your enrolment form, you will receive an email with your invoice.

You have three options when organising your payment:

  1. Upfront payment - can be made over the phone with EFTPOS
  1. Payment plan - can be directly debited from your bank account, debited from your Centrelink payments or via a VET Student Loan (for diploma or advanced diploma courses only)
  1. Paid by employer, school or job network agency - if your fees are being paid by your employer, school or job network agency, you will need to complete an Authority to Invoice form.

Payments will need to be arranged within five(5) business days of receiving the email containing your invoice.

We also offer a range of scholarships each year which you may be eligible to apply for to assist with course fees.

Next Steps
How to apply

There are five simple steps to apply for a course with us.

  1. Apply - complete a short online application form. Once this form is submitted we'll send you a thank you email.
  2. Get ready - your thank-you email will contain links to a pre-training review, to a unique student identifier and to government-subsidised training eligibility.
  3. Chat with your teacher - your teacher or course specialist will contact you about your Pre-Training Review outcomes and additional course information.
  4. Enrol - after chatting with your teacher, you will receive an email with your enrolment form and a link to verify your identity.
  5. Sign - once you've completed your enrolment, you will receive a declaration form to review and sign.

If need any assistance with applying, contact our Customer Service team on 1300 648 911 or visit your nearest campus.

Careers and Course Advice

Not sure which course is right for you? South West TAFE will help you find your way.

Our Careers Coaches at the Skills and Jobs Centre is here to support you. Whether you’re exploring career options, transitioning from school to the workforce or looking to study after school we’re here to help you.

Student Support

As a SWTAFE student, you can access a variety of support services that will enhance your study experience and help you complete your studies successfully. For more information about any of these services, visit our student page.